|
exhaust gas in cab, 4cyl engine
The DPF is upstream from the two SCR catalysts. Attached is a diagram of the exhaust/emissions system for Sprinters that use DEF, 2010 and newer (i.e. 2011 and newer Views/Navions). Diesel Particulate
The DPF is upstream from the two SCR catalysts. Attached is a diagram of the exhaust/emissions system for Sprinters that use DEF, 2010 and newer (i.e. 2011 and newer Views/Navions). Diesel Particulate
|
By
Ken Marr
· #55730
·
|
|
Damage Caused by “nest” in engine air intake
I can't tell from the pic, is the crack on the turbo side of the air filter? If so, definitely no bueno as dirt can get in and destroy the turbo and more. If not, it's not as big of a concern and easi
I can't tell from the pic, is the crack on the turbo side of the air filter? If so, definitely no bueno as dirt can get in and destroy the turbo and more. If not, it's not as big of a concern and easi
|
By
Ken Marr
· #55691
·
|
|
DIY lithium battery systems
Don, at al...... When I run the microwave off my 2000W Victron inverter powered by two 6V Trojan 105's, the draw is around 145A, but only 20 to 30A with the engine running. Of course one doesn't want
Don, at al...... When I run the microwave off my 2000W Victron inverter powered by two 6V Trojan 105's, the draw is around 145A, but only 20 to 30A with the engine running. Of course one doesn't want
|
By
Ken Marr
· #55682
·
|
|
Temperature control dial
I'm with Dale, MB Wilsonville has the most opulent customer waiting area on the planet. It's a great place to stop for complimentary Barista drinks and a bite to eat when passing through cruising thro
I'm with Dale, MB Wilsonville has the most opulent customer waiting area on the planet. It's a great place to stop for complimentary Barista drinks and a bite to eat when passing through cruising thro
|
By
Ken Marr
· #55273
·
|
|
Dreaded Click and NO START Cause/Photo of Relay
Bob, at al, That's not carbon, rather, it's copper (II) oxide, CuO. The poor contact when solenoid closes along with the high current generates significant amounts of heat that causes the copper elect
Bob, at al, That's not carbon, rather, it's copper (II) oxide, CuO. The poor contact when solenoid closes along with the high current generates significant amounts of heat that causes the copper elect
|
By
Ken Marr
· #55239
·
|
|
locked
2008 View - Wiring a DC to DC Charger
Peace, love and happiness brothers! It's time to take a deep breath and enjoy life as it's too short to be squabbling! Ken 11J Happy with 300W solar, 2000W inverter powered by two old fashion 6V Troja
Peace, love and happiness brothers! It's time to take a deep breath and enjoy life as it's too short to be squabbling! Ken 11J Happy with 300W solar, 2000W inverter powered by two old fashion 6V Troja
|
By
Ken Marr
· #54748
·
|
|
NOx error message
Simon, Wheel speed sensors are covered by the 5yr/100k mile emissions warranty, but NOT the 7yr/70k mile CARB emissions warranty. Check your warranty booklet for details and the myriad of things cover
Simon, Wheel speed sensors are covered by the 5yr/100k mile emissions warranty, but NOT the 7yr/70k mile CARB emissions warranty. Check your warranty booklet for details and the myriad of things cover
|
By
Ken Marr
· #54198
·
|
|
Tires !!
Dan, No, just use the MB lift points as designed by the MB engineers. There's no need to do it as your tire shop wants to do. Ken 11J WA
Dan, No, just use the MB lift points as designed by the MB engineers. There's no need to do it as your tire shop wants to do. Ken 11J WA
|
By
Ken Marr
· #54174
·
|
|
Tires !!
Louie, That's almost exactly my same experience at DT! New tires in 2019 and I also didn't know at the time the rubber gaskets/seals should have been replaced. Fast forward to this year and a rear inn
Louie, That's almost exactly my same experience at DT! New tires in 2019 and I also didn't know at the time the rubber gaskets/seals should have been replaced. Fast forward to this year and a rear inn
|
By
Ken Marr
· #54173
·
|
|
Tires !!
I agree, at Discount Tire (or wherever you go), it's worth the time to educate both the service writer and the tech working on your rig how to install the Borg stems. I provide and go over the install
I agree, at Discount Tire (or wherever you go), it's worth the time to educate both the service writer and the tech working on your rig how to install the Borg stems. I provide and go over the install
|
By
Ken Marr
· #54169
·
|
|
Upgrade to 2000 watt inverter? What is process?
I've had zero issues running the microwave off of my Trojan T-105 225Ah 6V batteries. The batteries are still going strong after 5 years. The Blue Sky battery monitor shows that the battery state of c
I've had zero issues running the microwave off of my Trojan T-105 225Ah 6V batteries. The batteries are still going strong after 5 years. The Blue Sky battery monitor shows that the battery state of c
|
By
Ken Marr
· #53958
·
|
|
Upgrade to 2000 watt inverter? What is process?
Dear Old....., You wrote..... "In contrast to what @Ken saw, my Victron meter showed about a 3% power depletion per minute at the 150A draw of my convection microwave." I'm not sure where the 3% comes
Dear Old....., You wrote..... "In contrast to what @Ken saw, my Victron meter showed about a 3% power depletion per minute at the 150A draw of my convection microwave." I'm not sure where the 3% comes
|
By
Ken Marr
· #53924
·
|
|
The RV industry needs high efficiency mini split technology
I agree, a mini-split option would be great, but although uncommon, they do exist and are a possible DIY. For example..... https://youtu.be/aDXKuZaMXoY https://www.hvachowto.com/what-is-the-best-mini-
I agree, a mini-split option would be great, but although uncommon, they do exist and are a possible DIY. For example..... https://youtu.be/aDXKuZaMXoY https://www.hvachowto.com/what-is-the-best-mini-
|
By
Ken Marr
· #53867
·
|
|
Shocks... PS #2
Paul, Your messages are sounding like Déjà Vu all over again! Ken 11J WA
Paul, Your messages are sounding like Déjà Vu all over again! Ken 11J WA
|
By
Ken Marr
· #53842
·
|
|
Shocks
Paul, All of the oscillation data collected by Calbiker was done with the accelerometer in his rig with the shocks installed (Fox, Koni or Fox) and as a control, without any shocks. Ken 11J WA
Paul, All of the oscillation data collected by Calbiker was done with the accelerometer in his rig with the shocks installed (Fox, Koni or Fox) and as a control, without any shocks. Ken 11J WA
|
By
Ken Marr
· #53838
·
|
|
Shocks
Paul, An accelerometer can be used to quantity oscillations. See the comments by Calbiker for details here..... https://sprinter-source.com/forums/index.php?threads/49740/ He's worked with Agile Off-r
Paul, An accelerometer can be used to quantity oscillations. See the comments by Calbiker for details here..... https://sprinter-source.com/forums/index.php?threads/49740/ He's worked with Agile Off-r
|
By
Ken Marr
· #53824
·
|
|
Shocks
FYI.... Here's an excellent first-hand account of suspension mods..... https://www.viewnavion.com/mods/suspension Ken 11J with Agile Fox Shocks + Helwig WA
FYI.... Here's an excellent first-hand account of suspension mods..... https://www.viewnavion.com/mods/suspension Ken 11J with Agile Fox Shocks + Helwig WA
|
By
Ken Marr
· #53823
·
|
|
Repair Bill Bomb
Paul, A Knox sensor is part of the security system protecting the gold reserves at Fort Knox. Happy travels, Ken 11J WA
Paul, A Knox sensor is part of the security system protecting the gold reserves at Fort Knox. Happy travels, Ken 11J WA
|
By
Ken Marr
· #53777
·
|
|
Repair Bill Bomb
Although the emissions warranty may have expired, it never hurts to ask the service manager to contact MB USA (or MB Canada) to cover emissions Repairs as a goodwill gesture, especially when involving
Although the emissions warranty may have expired, it never hurts to ask the service manager to contact MB USA (or MB Canada) to cover emissions Repairs as a goodwill gesture, especially when involving
|
By
Ken Marr
· #53763
·
|
|
Stranded in Woodland, WA
Jerry, You are in good hands with MB Tacoma. I have both recent and personal experience there. The service manager, Sarah Volz, and head Sprinter Tech, Ken, are excellent and will go the extra mile fo
Jerry, You are in good hands with MB Tacoma. I have both recent and personal experience there. The service manager, Sarah Volz, and head Sprinter Tech, Ken, are excellent and will go the extra mile fo
|
By
Ken Marr
· #53760
·
|